Title:
Mechanics For Pilots - Return to Service after Maintenance
Topic:
Return to Service after Maintenance
Speaker(s):
Craig Patterson
Brief Description:
The General Aviation Joint Steering Committee (GAJSC) has identified a number of fatal general aviation accidents caused by flying in an aircraft that is undergoing maintenance and is not approved for return to service. Before you take or fly an aircraft, always check for the signed, Approval for Return to Service entry in the aircraft’s logbook. Most aircraft owners are up to speed on the status of their aircraft, and rental fleets usually have aircraft status boards or squawk sheets to check for problems with an airplane, but nevertheless some pilots take, or attempt to fly, an airplane that is undergoing maintenance or is not ready to be returned to service. Never assume that an aircraft is ready to fly.
Select Number:
SW13136419
Location of Seminar:
Floris Flight Services
901 Veterans Airpark Lane
Midland, TX 79705
Directions to Venue:
Driving........From Veterans Airpark Lane, continue to Midland Airpark Airport north gate. Enter the code for the north gate. Code can be provided by calling Floris Flight Services at (432) 203-2048. Park on south side of the hangar.
Flying........KMDD is the identifier. Park on the west side of the hangar. For airport information, see attached airport diagram.
1.5 hours of safety presentations are available at this event.
View Map
Seating:
20
seats at the facility,
15
remaining for online registration.
Registration Information:
Sponsoring Division:
FAASTeam
Additional Event Information & Acknowledgement of Industry Sponsor(s):
Thank you to Floris Flight Services. Refreshments will be provided.
Equal Access Information:
The FAA Safety Team (FAASTeam) is committed to providing equal access to this meeting/event for all participants. If you need alternative formats or services because of a disability, please communicate your request as soon as possible with the person in the “Contact Information” area of the meeting/event notice. Note that two weeks is usually required to arrange services.
Credit Applicability:
1 Credit for Basic Knowledge Topic 3
½ Credit for Advanced Knowledge Topic 2
FAASTeam Project Information:
National Project:
Any Safety Event held based upon data/risk
Additional Event Documents: